What is the standard Fujitsu AIRSTAGE warranty?

Fujitsu publishes parts and compressor warranty terms (often 10 years when installed by a licensed contractor and registered). Always confirm the current warranty for your exact model and market.

How do I register my Fujitsu system and check warranty status?

Use Fujitsu’s online Product Registration and Warranty Lookup tools. Have your model, serial number, and installation date ready.

Where can I find Fujitsu troubleshooting guides and manuals?

See Fujitsu’s Support page for FAQs, basic troubleshooting, operation manuals, submittals, and warranty PDFs for your model.

Can I buy genuine Fujitsu replacement parts?

Yes—order genuine parts by model and serial number to ensure compatibility. We can help confirm part numbers before you buy.

How do I choose the right CFM for an Air King bath fan?

Match CFM to room size and code requirements. For typical bathrooms, target 1 CFM per square foot. Verify duct length and elbows to maintain airflow.

What do sone ratings mean on Air King fans?

Sones measure perceived sound. Lower sone ratings indicate quieter operation. Check each model’s sone rating at the listed CFM.

Are Air King range hoods and bath fans ENERGY STAR® certified?

Many models are. See the product page specifications for ENERGY STAR® status and efficiency details.

Do you carry genuine Air King parts and accessories?

Yes. We stock authentic replacement grilles, motors, switches, and accessories. Provide your model number to confirm fit.

How fast do Air King items ship?

Popular models typically ship quickly. Check live availability on the product page or contact us for expedited options.

Do you carry OEM Beckett burner parts and condensate pumps?

Yes—motors, nozzles, igniters, primary controls, and condensate pump assemblies. Provide model/serial for exact fit.

How do I size a condensate pump?

Check max head (lift), flow rate, reservoir volume, and safety switch needs. Match to the equipment’s condensate output.

Are check valves and tubing included with pumps?

Many pumps include a check valve; tubing is often separate. See the ‘Includes’ section per SKU.

What maintenance is recommended for pumps?

Clean the reservoir, float, and inlet regularly; replace tubing and check valve as needed.

Where are manuals and exploded views?

They’re linked on each product page under Documentation.

Where can I find Danfoss HVAC/R troubleshooting help?

Use the Danfoss Technical Support hub for troubleshooting guides, tips, and links to resources for drives and climate solutions.

Is there a Danfoss Refrigeration & Air Conditioning FAQ?

Yes. Danfoss maintains FAQs that cover compressors, electronic controls, filter driers, valves, and related topics for installers and service pros.

How do I confirm if a Danfoss part fits my system?

Match the part number against your equipment documentation. If needed, share your model and application details and we’ll help verify a correct replacement.

Do Danfoss controls require firmware or software updates?

Some products do. Check the product’s documentation and the Danfoss support pages for the latest software and update instructions.

How fast can Danfoss parts ship?

Most popular items ship quickly from stock. Lead times for specialty components vary—contact us with your needed date and project location.

What kinds of HVAC accessories does DiversiTech make?

Pads, line sets, condensate solutions, electrical components, chemicals, tools, and installation hardware for residential and light commercial HVAC/R.

How do I size a DiversiTech equipment pad?

Choose a pad larger than the unit’s footprint and rated for the application. Check unit dimensions and local code requirements.

Do you stock genuine DiversiTech parts?

Yes—authentic DiversiTech products with manufacturer specs and documentation. Contact us with your model or use filters to confirm.

Are condensate pumps and safety switches included?

Many condensate solutions include switches; others are separate. Review each product’s ‘Includes’ and wiring diagram.

What about shipping and lead times?

Common SKUs ship quickly. Bulk/contractor quantities and specialty items may require additional lead time.

What does a Drain Alert condensate safety switch do?

It detects condensate backups or pan overflow and opens the safety circuit to shut the system down before water damage occurs.

Where should I install the switch—primary line, secondary pan, or both?

Follow local code and manufacturer instructions. Many installs use a float in the secondary pan plus an inline switch at the primary drain for redundancy.

Is wiring normally open or normally closed?

Most HVAC safety switches are wired in series as normally closed; when water is detected they open the circuit. Verify on the product’s diagram.

Will the switch work with heat pumps and furnaces?

Yes—wire it into the low-voltage safety circuit per the unit’s control board diagram.

Do I need maintenance after installation?

Keep drains clear, test the float at service visits, and replace the switch if it shows wear or fails a function test.

Do you stock EcoSmart genuine parts and accessories?

Yes, we carry authentic EcoSmart products and accessories for professional HVAC installation and service.

Which EcoSmart category should I choose?

Use the Related Categories links to browse the top EcoSmart categories. Our team can help match models and accessories for your system.

Do you offer fast shipping on EcoSmart items?

Yes. Most EcoSmart items ship quickly from stock. Check each product page for current availability.

What aluminum products are used around HVAC installs?

Coil guards, louvered panels, screens, fascia, and general aluminum stock for protective or architectural use.

How do I select thickness and alloy?

Choose thickness based on load and impact risk; select alloy/temper for corrosion resistance and formability.

Are custom cuts and finishes available?

Yes—cut-to-size, perforations, and powder-coat or anodized finishes may be available by request.

Can aluminum be used in coastal environments?

Yes—use marine-grade alloys or protective finishes and follow fastener compatibility to minimize galvanic corrosion.

Do you provide submittals or drawings?

Project quotes can include drawings/specs; provide dimensions, mounting method, and site photos if possible.

Which fasteners should I use for HVAC hangers and supports?

Choose by material, load rating, and environment. For sheet metal, confirm gauge and corrosion requirements.

What’s the difference between self-drilling and self-tapping screws?

Self-drilling screws have a drill-bit tip for metal; self-tapping require a pilot hole or thin material.

Do you offer stainless or coated fasteners for coastal areas?

Yes—stainless and corrosion-resistant coatings are available. Check the product’s material grade.

Can I buy bulk contractor quantities?

Yes—contractor packs and case quantities are available for common sizes.

Are driver bits included?

Bits are usually separate; see the ‘Includes’ section per SKU.

Where can I find Fieldpiece FAQs, manuals, and updates?

Visit Fieldpiece Support for FAQs, user manuals, firmware/software updates, product registration, and service requests.

How does Fieldpiece warranty service work?

Warranty terms vary by tool. Register your product and contact Fieldpiece for repair or replacement guidance. Keep your receipt and serial number available.

Do Fieldpiece scales, leak detectors, and analyzers have replacement parts?

Yes. Many instruments have replaceable sensors, hoses, probes, and accessories. Check the product’s FAQ page or manual for part numbers.

How do I update firmware on compatible Fieldpiece tools?

Download the latest software/firmware from Fieldpiece Support and follow the device-specific instructions in the manual.

Where can I buy Fieldpiece tools near me?

Use the Fieldpiece ‘Where to Buy’ locator or order from authorized distributors online for fast delivery.

Do you supply First Co air handler parts?

Yes—contactors, blower motors, control boards, TXVs, and coils. Provide model and serial to verify compatibility.

How can I identify my First Co model?

Use the data plate on the air handler or the original manual. The model string defines tonnage, coil type, and configuration.

Are OEM coils and pans available?

Yes—availability varies by series and year. We’ll confirm using your full model/serial.

Do you offer replacement TXVs and metering devices?

We stock common TXVs and orifices. Match refrigerant type, capacity, and connection size.

F&L Aluminum HVAC Products | Line Set Covers, Vents & Accessories

Home
F and L Aluminum

There are no products listed under this brand.

F and L Aluminum