GEI Hot Surface Igniters
Shop GEI silicon nitride and silicon carbide hot surface igniters for residential and commercial furnace ignition applications. Use the original equipment part number, connector configuration, mounting style, voltage, and equipment documentation to identify the correct replacement.
What Are GEI Hot Surface Igniters?
GEI hot surface igniters are electrical ignition components used to light gas burners in furnaces, boilers, rooftop units, unit heaters, water heaters, and other gas-fired heating equipment.
HVAC PRO Sales currently offers a focused selection of GEI silicon nitride and silicon carbide igniters. The correct replacement must be identified using the original part number, equipment model, voltage, connector, mounting bracket, dimensions, and manufacturer documentation.
Important Compatibility Notice
Hot surface igniters must be selected using the original part number and verified against the equipment manufacturer’s documentation. Before ordering, compare the connector, mounting bracket, voltage, dimensions, lead-wire configuration, and furnace or heating-equipment model.
Cross-reference information is provided as a purchasing aid and does not replace manufacturer verification.
Shop GEI Furnace Igniters
Our current GEI pilot selection includes silicon nitride and silicon carbide replacement igniters for commonly searched furnace and HVAC ignition part numbers.
How Do I Choose the Correct GEI Igniter?
Start with the original igniter part number and the complete furnace or equipment model number. Then verify the operating voltage, connector style, lead-wire configuration, mounting bracket, element position, and dimensions before ordering.
Do not select an igniter by appearance alone. Similar-looking ignition components may have different electrical and mounting requirements.
62-22868-82 Silicon Carbide Hot Surface Ignitor — GEI HSI-4008
Primary MPN: HSI-4008
$27.99
View Product
0130F00008S Silicon Nitride Hot Surface Ignitor — GEI
Primary MPN: 0130F00008S
$29.99
View Product
GEI 920520118 24V Silicon Nitride Igniter and Flame Rod Assembly
Primary MPN: 920520118
$39.99
View ProductWhy Choose GEI Igniters?
Reliable Ignition
Designed to provide dependable ignition during the furnace startup sequence when matched to the correct equipment application.
Compact Construction
Silicon nitride elements provide a compact replacement format used in many modern gas-fired heating systems.
Part-Number Selection
Products are organized around manufacturer part numbers and known replacement references to support accurate sourcing.
Manufacturer-Supported Warranty
GEI igniters include a one-year limited manufacturer-supported warranty, subject to manufacturer review and applicable warranty terms.
How to Identify the Correct Replacement
Find the original part number
Check the existing igniter, equipment label, service documentation, wiring diagram, or manufacturer parts list.
Verify the electrical requirements
Confirm the operating voltage and electrical specifications shown in the equipment documentation.
Compare the connector
Verify the connector style, number of pins, lead-wire length, and wiring configuration.
Check the mounting design
Compare the mounting bracket, hole spacing, element position, and overall dimensions.
Confirm the equipment model
Use the furnace or heating-equipment model and serial number to confirm the replacement before ordering.
Common Signs of an Ignition-System Problem
- Furnace starts but does not ignite
- Ignition sequence stops before burner operation
- Igniter does not glow during the startup cycle
- Igniter element appears cracked or damaged
- Control board displays an ignition-related fault code
- System repeatedly attempts ignition and shuts down
These symptoms can also involve the control board, flame sensor, gas valve, pressure switch, wiring, power supply, or other safety controls. Diagnosis should be performed by a properly qualified technician.
GEI Igniter Resources
Continue with the furnace ignition diagnostic guide or explore additional HVAC technical resources.
Frequently Asked Questions About GEI Hot Surface Igniters
What is a hot surface igniter?
A hot surface igniter is an electrical ignition component that heats to a high temperature to ignite gas at the burner during the startup sequence of a furnace, boiler, unit heater, rooftop system, water heater, or other gas-fired appliance.
How do I identify the correct GEI furnace igniter?
Begin with the original igniter part number and the equipment model and serial number. Then verify the voltage, connector, lead wires, mounting bracket, dimensions, element position, and the equipment manufacturer’s parts documentation.
Are silicon nitride and silicon carbide igniters interchangeable?
Not automatically. Silicon nitride and silicon carbide igniters may have different voltage, resistance, connector, mounting, dimensional, and control-system requirements. Use only a replacement verified for the specific equipment application.
Can I select a furnace igniter based only on appearance?
No. Igniters can look similar while having different electrical characteristics, mounting brackets, connectors, lead lengths, and equipment applications. Always verify the original part number and equipment documentation.
What information should I provide for igniter identification help?
Provide the equipment manufacturer, model number, serial number, original igniter part number, clear photos of the igniter and connector, mounting details, quantity required, and delivery ZIP code.
Who should install a furnace hot surface igniter?
A qualified HVAC technician should diagnose and install furnace ignition components. Gas-fired heating equipment includes electrical, combustion, venting, fuel-gas, and safety-control hazards.
What warranty applies to GEI igniters sold by HVAC PRO Sales?
The current GEI products offered by HVAC PRO Sales include a one-year limited manufacturer-supported warranty. Eligibility and remedy are subject to manufacturer review and the applicable warranty terms.
About the GEI Igniter Selection at HVAC PRO Sales
HVAC PRO Sales, operated by AUREVIANOVA IA LLC, offers GEI hot surface igniters for HVAC and gas-fired heating applications.
The current GEI pilot selection includes three live products covering approved silicon nitride and silicon carbide ignition components. Products are organized by manufacturer part number, SKU, material, equipment application, and known replacement references.
Additional GEI products may be considered after customer demand and pilot sales are evaluated. For broader research, review the furnace ignition diagnostic guide and HVAC technical resources.
Need Help Identifying a Furnace Igniter?
Send HVAC PRO Sales the equipment model number, serial number, original igniter part number, clear photos, connector details, quantity, and delivery ZIP code. We will review the information for product sourcing and availability.
Shop GEI Igniters Contact HVAC PRO Sales