Free Shipping on Select Items | Order by 3:00 PM ET for Same-Day Handling | Promotions & Seasonal Specials | (866) 330-1709

Tubing & Piping Tools

(Showing 3 of 3)
HVAC TOOLS — TUBING & PIPING

HVAC Tubing & Piping Tools

We help HVAC contractors and installers source tube cutters, flaring tools, swaging tools, tube benders, and piping accessories for refrigerant and hydronic system work. Availability may vary by supplier, stock status, and product type.

What This Category Includes

Tubing and piping tools are essential for cutting, forming, and connecting copper refrigerant lines and hydronic piping. This category covers tools used in mini-split installation, split system service, and hydronic system work.

ⓘ Proper flaring and swaging technique is critical for leak-free refrigerant connections. Always deburr tubing ends and inspect flares before assembly.

Tube Cutters

Ratchet and standard tube cutters for clean, square cuts on copper tubing. Mini tube cutters for tight-space mini-split work.

Flaring Tools

45-degree flare tools for SAE refrigerant connections. Available in manual, ratchet, and impact-style configurations.

Swaging Tools

Tube swaging tools for creating brazed joint connections. Available as individual punch sets or complete kits.

Tube Benders

Spring-type and lever-type tube benders for forming smooth bends in copper tubing without kinking.

Deburring Tools

Internal and external deburring tools for removing burrs from cut tubing ends before flaring or swaging.

Pipe Wrenches & Fittings Tools

Pipe wrenches, press tools, and fitting tools for hydronic and gas piping work.

Frequently Asked Questions

Q: What tools are needed for HVAC copper tubing work?

HVAC copper tubing work requires tube cutters, flaring tools, swaging tools, tube benders, and deburring tools. Proper flares and swages are critical for leak-free refrigerant connections. Always deburr cut tubing ends before flaring or swaging.

Q: What is the correct flare angle for HVAC refrigerant connections?

HVAC refrigerant connections use a 45-degree flare angle (SAE standard). Verify the flare tool produces a clean, uniform 45-degree flare without cracks or irregularities. Improper flares are a leading cause of refrigerant leaks.

Q: What size tube cutter do I need for mini-split line sets?

Most residential mini-split line sets use 1/4" and 3/8" or 1/2" tubing. A standard mini tube cutter (1/8" to 5/8" capacity) handles most residential applications. Larger commercial line sets may require a full-size tube cutter.

Q: What is a swaging tool used for?

A swaging tool enlarges the end of a copper tube to accept another tube of the same diameter for a soldered (brazed) connection. Swaged joints are used where flare fittings are not appropriate, such as in brazed refrigerant circuit connections.

Need Help Sourcing Tubing or Piping Tools?

Submit your application, tubing size, or tool specifications for sourcing support.

Contact Procurement Support
Compare